Home | History | Models | Gallery | FAQ | Press Releases | Avionics | Location | Contact
Frequently Asked Questions
Q. Where can I get a three-view drawing of the Baby Ace Model D/Junior Ace Model E?
A. Click on the links below:
Q. Where can I get the rigging data for the Baby Ace and Junior Ace?
A. Here you go:
- Datum: Leading Edge of the Wing
- Level Reference: Upper Longeron
- Center of Gravity:
- Empty CG - 12.5 to 13.5 inches
- Forward Limit - 11.88 inches
- Aft Limit - 18.36 inches
- Incidence Angles
- Reference: Upper Longeron
- Wing - +1.19 degrees
- Horizontal Stabilizer - 0 degrees
- Vertical Fin - 0 degrees (fuselage centerline)
- Engine - 0 degrees vertical and horizontal
- Control Surface Traval
- Ailerons - 20 degrees up/down
- Elevator - 32 degrees up/down
- Rudder - 27 degrees left/right
- Wing Rigging (with Aircraft leveled)
- Dihedral - approzimately +0.75 degress
- After setting dihedral, adjust the struts such that the wing tip rib is at the same angle as the wing root rib for each wing, then lengthen the rear strut 1.5 to 2 turns of adjusting fork to set tip washout.
Have other questions? Feel free to contact us. Also, you can download a Free Information Packet by clicking here.
This page last updated
Sunday, January 22, 2012